Correcting Distorted Stitch Patterns - Kenmore 10 Owner's Manual

Correcting
Distorted Stitch Patterns
The sewing results of the stretch stitch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of the fabric, number of layers etc.
Always make test sewing on a scrap piece of the fabric that
you wish to use.
if decorative stitch patterns, letters, or numbers are
distorted, correct it with the feed balancing dial.
Notes:
• In normal sewing, set the feed balancing dial (_ to the
neutral position, i.e., the groove on the dial @ is
centered with the standard setting mark _.
• Turn the feed balancing dial (_ with a coin.
(_ Feed balancing dial
Groove on the dial
Standard setting mark
• If the pattern is compressed, turn the dial in the direction
of "+".
• If the pattern is drawn out, turn the dial in the direction
(_ Correct shape
Note:
Return the feed balancing dial (_ to its neutral position
when the sewing is finished.
S
S
V
+ -
J