Stretch Stitch; Basting Stitch; Zipper Sewing; To Snap On The Zipper Foot - Kenmore 10 Owner's Manual

Embroidery/sewing machine
Table of Contents

Advertisement

Stretch
Stitch
Stitch pattern:
10
Needle thread tension
3 to 6
Presser foot A:
Zigzag foot
Pressure dial
3
This is a narrow stretch stitch designed to eliminate
puckering on knit fabrics and bias seams, while permitting
the seam to be pressed completely open flat.
Basting
Stitch
Stitch pattern:
15
Needle thread tension
1 to 4
Presser foot A:
Zigzag foot
Pressure dial
1
The basting stitch is used to hold fabric layers together
during fitting. Use a fine needle so as not leave permanent
needle marks on fabrics.
Press pattern 15 on the visual touch screen. Drop the feed
dogs (see page 6).
Depress the foot control. The machine will take one stitch
and stop automatically.
Hold the fabric taut and slide it to where you want the next
stitch, then depress the foot control again.
Continue in this manner sliding the fabric sideways or
forward.
Zipper Sewing
Stitch pattern:
1
Needle thread tension
2 to 6
Presser foot E:
Zipper foot
Pressure dial
3
• To snap on the zipper foot
(_ Groove
Pin
To sew left side
To sew right side
Fit the pin on the zipper foot into the groove on the foot
holder.
* To sew the left side of the zipper, attach zipper foot with
the right-hand side of pin.
* To sew the right side of zipper, attach the zipper foot with
the left-hand side of pin.
S
®
®
S
S
®
®
®
J
J
J
J
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

20038519Elite ergo 3 385.19010200

Table of Contents