Presser Foot Types; Zigzag Foot (Foot A); Straight Stitch Foot (Foot H); Automatic Buttonhole Foot (Foot R) - Kenmore 10 Owner's Manual

Presser Foot Types
• zigzag foot (Foot A)
Use this foot for both straight and zigzag stitching.
• Straight stitch foot (Foot H)
Use this foot for exclusively for straight stitching with
center needle position.
• Automatic buttonhole foot (Foot R)
Use this foot for one step automatic buttonhole sewing.
Simply set a button on the guide of this foot and depress
the foot control. You can sew exactly the same length of
buttonhole as the button.
• Zipper foot (Foot E)
This foot can be set to sew on each side of the zipper.
The edge of the foot guides the zipper and keeps the
seam straight.
• Overedge foot (Foot C)
This foot is specially constructed for stitching and/or
overcasting seams. The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics.
• Satin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique.
• Blind hem stitch foot (Foot G)
Use this foot for perfect blind hemming and topstitching.
The foot has ridges on the bottom to keep the fabric from
slipping and a screw on top to guide the folded edge of
your hem.
S
10
f
J
J