•
To configure the RS-485 parameters, select <System Setup> from OSD main menu, and then
select <RS485 Setup>. The default Professional H.264 DVR RS-485 settings are 9600 Baud,
8 Data Bits, 1 Stop Bit and No Parity.
Control Buttons of Dome Camera Control:
Set / Go Preset
1
Toggle Hint Screen
2
Go Presets 1~6
3
Pan / Tilt
4
Enter Dome Camera
5
Control Mode
Basic Playback Operation
Searching Recorded Video by Time:
•
Press SEARCH button to enter the Search menu.
•
Move the cursor to "From Time" and press ENTER will start playing recorded video from the
specified "From Time".
•
Move the cursor to "End Time" and press ENTER will start playing recorded video from the
specified "End Time".
•
Use Direction keys to move the cursor for setting the Start Time; adjusting the date and time
values by UP/DOWN keys. Press ENTER to confirm or ESC to abort.
•
Move the cursor to <Begin Playback> and press ENTER to start playing back the selected
video. Either press PLAY/STOP again or ESC to return to live video.
NOTE: If there is no available recorded video that matches your specified time and date,
the unit starts to playback from the next available video.
Searching Recorded Video by Event:
•
Press SEARCH button to enter the Search menu.
•
To search event video that was recorded on a specific camera, use LEFT/RIGHT keys to move
the cursor and press ENTER to select or de-select a channel.
•
Move the cursor to <Event List> and press ENTER to list the event video of the selected
channels.
Iris Open
6
Iris Close
7
Focus Far
8
Focus Near
9
Zoom Out
10
Zoom In
11
ESC
12
Enter / Auto
13
7