Optical Parts Disassembly
m Locations and Directions
When mounting or assembling the optical parts in the op-
tical unit, the parts must be mounted in the specified loca-
tion and direction as shown in figure below.
1
2
3
Point marker is
printed on this
side up
4
Point marker is
printed on this
side up
5
6
7
8
Point marker is
printed on this
side
Rugged surface
is facing this
side.
528
--
No.
Parts Name
1
Integrator lens (OUT)
Prism beam splitter (PBS)
3
Condenser lens (OUT)
4
Dichroic mirror (B)
5
Dichroic mirror (G)
6
Condenser lens (G)
7
Relay Lens (IN)
8
Mirror (R)
9
Condenser lens (R)
10
Condenser lens (B)
11
Mirror (B)
Film attached
side is facing this
side.
Point marker is
printed on this
side
527
Point marker is
printed on this
side
11
10
9
8
Fig.7