Table of Contents
Advertisement
optical Parts disassembly
,
Locations and Directions
When mounting or assembling the optical parts in the
optical unit, the parts must be mounted in the specified
location and direction as shown in figure below.
1
2
3
4
5
6
7
The arrows in the figure indicate the mount direction
of the part for the replacement. Check the number on
the arrows and mount each part according to its note;
A: The printed part no. comes to this side.
B: Rugged surface comes to this side.
slit
Place the lens
as the leddes
come up side.
-19-
No.
Parts Name
1
Integrator lens (OUT)
2
Prism beam splitter (PBS)
3
Condenser lens (OUT)
4
Dichroic mirror (B)
5
Dichroic mirror (G)
6
Condenser lens (G)
7
Mirror (R)
8
Condenser lens (R)
9
Condenser lens (B)
10
Mirror (B)
10
9
8
7
Fig.8
Advertisement
Table of Contents
