Connecting A Computer - ViewSonic PLED-W200 User Manual

Connecting a computer

The projector provides a VGA input socket that allows you to connect it to both IBM
compatibles and Macintosh
connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer:
• Using a VGA cable
1. Take the supplied multi-input cable and connect one end to the D-Sub output
socket of the computer.
2. Connect the other end of the multi-input cable to the multi-input socket on the
projector.
3. If you wish to make use of the projector speaker, take a suitable audio cable and
connect one end of the cable to the audio output socket of the computer, and the
other end to the audio input socket of the multi-input cable.
Important
• Many notebooks do not turn on their external video ports when connected to a
projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display
on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol
on the notebook. Press FN and the labeled function key simultaneously. Refer to your
notebook's documentation to find your notebook's key combination.
Downloaded From projector-manual.com Viewsonic Manuals
®
computers. A Mac adapter is needed if you are
16
®