ViewSonic PLED-W200 User Manual page 30

OSD Transparency
Select to change the transparency level of the OSD background.
LED Calibration
Press ENTER after choosing "Yes", please wait for 10 seconds to finish the white color
fine tune process. (This function can be used after 30 minutes turning on.) It helps to
adjust LED color performance.
Option
Blank Screen
Blank the screen temporarily, and select the screen color when this function is active.
Password
Set, change or delete the password. When the password function is added, image
projection will require to input the preset password when turning on the projector.
Closed Caption
Enable or disable closed captions by selecting CC1 (closed caption1, the most
common channel), CC2, CC3, CC4, T1, T2 or OFF.
Zoom
Zoom in and out the images.
Message
Enable or disable the message box at the right bottom of the screen.
Information
Input Source
Display the current input source.
Resolution
Display current input source resolution.
H. Frequency
Display current image horizontal frequency.
V. Frequency
Display current image vertical frequency.
LED Hours
Display the LED's elapsed operating time (in hours).
LED Hours Reset
Reset the LED Hour to 0 hours.
Factory Default
Downloaded From projector-manual.com Viewsonic Manuals
28