ViewSonic PLED-W200 User Manual page 29

Led projector

Hide thumbs Also See for PLED-W200:

Table of Contents

Noise Reduction

Reduce temporal and/or spatial noise in the image.

Video Setting

Allow you to enter the Video Setting menu.

• Saturation: Adjust a video image from black and white to fully saturated color.

• Sharpness: Sharpen or soften the image.

• Tint: Shift colors toward red or green.

Speaker Volume

Adjust the projector's volume level.

Mute

Cut off the sound temporarily.

Setting

Menu Position

Choose the menu location on the display screen.

Projection

Adjust the picture to match the orientation of the projector: upright or upside-down, in

front of or behind the screen. Invert or reverse the image accordingly.

Signal Type

Specify the source to the multi-input terminal that you wish to project.

• Auto : Automatically detect the input signal type from the input terminal.

• RGB : For VGA signal

• YCbCr/YPbPr: For component signal

Power Saving

If the input source is not detected and no operation is performed for a specific period

of time, projector will automatically turn off.

Auto Source

Automatically scan through all the input sources.

High Altitude

Use this function to allow the fans operates at full speed continuously to achieve

proper high altitude cooling of the projector.

OSD Timeout

Duration of OSD menu display countly starts (at idle state by second).

Downloaded From projector-manual.com Viewsonic Manuals

Table of Contents