Crisper Cover With Lattice On Inner Surface - Kenmore Elite 3840JL2019A User Manual

• Crispers with rails
To remove crisper:
1. Pull drawer out to full extension.
2. Lift the front of basket up and pull straight out.
CRISPER COVER WITH LATTICE ON INNER
SURFACE
WARNING: Be careful when handling glass cover since
glass is not attached to cover.
To remove lattice:
1. Be sure glass cover is removed.
2. Turn the cover frame over. Each lattice has its own
frame within the cover frame.
3. Pull left and right sides of lattice frame outward to
release lattice tabs from frame. Remove lattice.
To replace crisper:
1. Push rails to the back of the compartment.
2. Insert the back corner of the basket into frame.
3. Slightly tilt up the front and push back until it snaps into
place.
\
\
To replace lattice:
1. Pull sides of each lattice frame outward to re-insert
tabs of lattice into frame.
2. Slide the cover frame back into refrigerator and
securely onto frame support.
3. Place the glass cover back onto top of cover frame.
19