Crisper Coverwith Lattice On Inner Surface; Door Racks; Modular Door Bins - Kenmore 795.6500 Series Use & Care Manual

CRISPER COVERWITH LATTICE ON INNER
SURFACE
To remove cover frame:
1. Remove both crisper drawers.
2. Remove glass cover from frame. Set safely aside for
rest of crisper removal procedure.
3. While holding crisper cover frame support, pull the
frame up and out,
WARNING: Be careful when handling glass cover since
glass is not attached to cover.
To remove lattice:
DOOR RACKS
The door racks may be removed for easier cleaning,
Snap-on Door Racks
To remove the racks:
1. Remove all items in the door racks.
2. Push the rack against the inside wall of the door (A)
and lift uo the door rack (B),
To replace the racks:
1. Holdeither end of the do or rack against the inside wall of the door.
2. Push down the rack until it locks in place,
MODULAR DOOR BINS
1. Bins can be moved to either side of the door,
1. Be sure glass cover is removed.
2. Turn the cover frame over. Each lattice has its own
frame within the cover frame,
3. Pull left and right sides of lattice frame outward to
release lattice tabs from frame, Remove lattice,
2. To remove the bin;_imply lift the bin up and pull straight out.
To replace lattice:
1, Pull sides of each lattice frame outward to re-insert
tabs of lattice into frame.
2. Slide the cover frame back into refrigerator and
securely onto frame support,
3. Place the glass cover back onto top of cover frame,
3. To replace the bin, slide it in above the desired
support button and push down until it snaps into place,
4. When moving bins, make sure that bins are correctly
inserted so that they don't fall out of door,
<
(c
(Incorrect)
_WARNING: Somebody can be hurt if door bins are not
firmly assembled,
NOTE: Do not adjust a bin that is loaded with food,
,_,CAUTION: DO NOT allow children to play with baskets,
The pointed area of basket could injure them,
21