6. Position the ringer on the clip.
Attention!
The catches on the clip must engage exactly with the
holes in the ringer.
7. Now you connect the ringer plug-in connector .
8. Fasten the microphone in the lower housing section.
Attention!
The microphone contacts must not be dirty, damaged
or bent.
9. Fasten the card reader in the lower housing section.
Attention!
The card reader must not be dirty, damaged or bent.
10. Fasten the battery contacts in the lower housing
section.
Attention!
The battery contacts must not be dirty, damaged or
bent.
11. Now close the device by putting on the lower housing
section.
Attention!
All catches must engage completely.
Service Manual C25 / C2588
Sm_C25_lvl2_v10_w97
Private Communication Systems
V 1.0
Page 13 of 32
Mobile Phones
ICP CD ST
R. Fleuren
02/99