Download  Print this page

Charging; Short Circuit Protection - Siemens C25 Service Manual

Hide thumbs

Advertisement

7.2

Charging

The battery can only be charged if inserted into the telephone. The charging process
is completely controlled by the mobile. Different kinds of Siemens chargers out of the
accessory program for C25 models can be used for this task:
Ø Standard charger
Ø Quick charger
Ø Desk top charger
(This device is not really a charger but a stand for the mobile, where
Standard- , Quick- or Travel charger are connected to)
Ø Travel charger
Ø Car charger
Attention:
Charging the battery can be impossible, if the temperature is too high (e.g. in car use
during summer) or too low. This is to prevent the battery from being damaged during
fast charge process. To enable the charging process again, battery and phone only
needs to cool down/warm up. A replacement of battery is not necessary.
7.3

Short Circuit Protection

CAUTION:
The battery is not short-circuit protected by an electronic fuse like e.g. in S10. Inside
the battery a polyswitch is protecting the battery cells from a too high output current.
Schematic of the battery:
Service Manual C25 / C2588
Sm_C25_lvl2_v10_w97
Avoid short circuit of battery !
V 1.0
Page 24 of 32
Private Communication Systems
Mobile Phones
ICP CD ST
R. Fleuren
02/99

Advertisement

Table of Contents

   Also See for Siemens C25

   Related Manuals for Siemens C25

This manual is also suitable for:

C2588

Comments to this Manuals

Symbols: 0
Latest comments: