Pppoe; Ddns - OCB -DVR700 User Instruction Manual

Subnet Mask: Example 255.255.255.000.
Gateway: Example 192.168.000.001 (Modem/Router local address).
DNS: Please set DNS as local network supplier's IP when DVR is accessed from WAN.
Center IP and Port: If you set this IP and port, when there is alarm and exception happened, DVR will send
information to that host IP.
Center: Setting IP address and port of DVR and connect it with internet. Enter 'Platform' to setup the IP address
of P2P service provider and enable this function. Access this server through IE and add the DVR which is going to
be operated. The others can be done in the same manner.

PPPoE

In the network settings menu, select network mode as PPPoE, then click "Set PPPoE", such as fig 35.
Please input the Username and Password provided by ISP. System will use PPPoE protocol to connect the net
with an auto-obtain dynamic IP address.

DDNS

Set DNS as
local network supplier's IP in "Network" interface. Then select "
User can setup DDNS in this interface and access the DVR through the set domain name.
Provider: Could choose "dyndns.org" and "3322.org".
Host name: Domain name that user register. E.g. If the supplier is "dyndns.org", and the registered domain
name is "user.dyndns.org", you can input "user" in "Host name" option.
Username and Password: user name and password registered in supplier's website.
Fig. 35 Fig.36
DDNS" as shown in Fig.36.
40