OCB -DVR700 User Instruction Manual page 18

number key will switch the right channel.(press 2 and 3, ch 23 will displayed)
Clockwise in 1. "Right" Key
shuttle circle
Anticlockwise 1. "Left" Key
in shuttle
circle
4
Clockwise out 1. "Down" key
shuttle circle
Anticlockwise 1. "UP" key
out shuttle
circle
RUN Working indicator, flashing after boot normally
SPOT When current output is sport vout, lighting constantly
LINK Network link indicator, lighting constantly when network is connected
ACTIVE Network communication indicator, flashing when network is connected
5
PTZ PTZ control indicator, lighting constantly when control PTZ
HDD HDD indicator, flashing when access HDD date
ALARM Alarm indicator, flashing when alarm is activated
RESERVE Reserve
1. Start all channels' manual record
/PRESET
2. Fix the cursor or cancel the cursor fixed in mask area setup interface
3. Entry "Preset" interface In PTZ mode.
1. Entry "Search" interface
/FOCUS+
/ZOOM+ 1. Fast forward
/IRIS+ 1. Fast backward
1. Stop playback operation
/AUTO
mode
6
1. Pause playback
/FOCUS-
1. Jump to next recorded file
/ZOOM-
1. Jump to previous recorded file
/IRIS-
SPOT Switch between main vout and spot vout
MAINTAIN Enter "Maintenance" interface
Enter "Shut Down" interface
2. Switch to next screen display in preview mode
2. Switch to last screen display in preview mode
2. Split screen mode switch in preview mode
2. Split screen mode switch in preview mode
2. Focus+ In PTZ mode
2. Zoom+ In PTZ mode
2. Aperture+ In PTZ mode
2. Stop all channels' manual record in monitor
3. Auto cruise in PTZ mode
2. Focus- In PTZ mode
2. Zoom- In PTZ mode
2. Aperture- In PTZ mode
17