Ir Remote Device; Section 3 Ir Remote Device - OCB -DVR700 User Instruction Manual

Mouse Option
Modify Number
Modify Character
Exit Menu
Adjusting the Monitor views
Multiple-Screen Switch
Full Screen Image
Picture Amplify
E-Zoom
Section 3

IR remote device

Insert the battery, then aim the launch end at the receive end of DVR while using IR
remote controller.
Remote control all key functionality specific see "DVR Front Panel". The following
Double-click to enter the input box, click relevant character to input number; Or
use trolley of mouse to modify number directly.
Double-click to enter the input box, click relevant character to input character.
Click the right mouse button to exit menu step by step.
On the monitor screen, click the right mouse button while you were out on the
shortcut menu, and then select the appropriate division to picture switch.
when multi-screen display, move mouse cursor to a channel, double-click
mouse left key to view Full screen, double-click again will back full screen to
multi-screen.
In a multiple screen appears, select a picture and press the left mouse button,
move the mouse to move the picture at this time. In a multiple-screen display,
move the mouse to the edge of the screen, when the mouse pointer changes to "
", a long press the left mouse button and move the mouse to resize the
screen size.
On the monitor screen, select a channel, and then click the right mouse button,
the shortcut menu, select "E-Zoom" into electronic mode, at this point with the
mouse in screen box out an area, the system will box out of the area to enlarge,
click the right mouse button to exit the zoom mode.
20