Table of Contents
Advertisement
PPPoE
Enter "Network" → "PPPoE Setup" as shown in Fig.27
Please "Enable" "PPPoE Setup", then input the Username and Password provided by ISP. System will use PPPoE
protocol to connect the net with an auto-obtain dynamic IP address.
Section 11
Net Transfer Parameter Setup
Enter "Main Menu Advanced Transfer", as shown in Fig.28
Move cursor with
and
Channel number: select relevant channel to setup.
Resolution: The higher resolution is, the clearer the image is. The resolution options from low to high are:
Fig.27
Fig. 28
on the front panel and select item with
39
and
.
Advertisement
Table of Contents
