Table of Contents
Advertisement
Welcome to the world of premier digital audio service provided by DMX. This guide is your handbook for
using the DR500 Digital Audio Satellite Receiver and the DMR-22 and DMR-28 DMX/DJ remote control
units.
The sections in this guide provide step-by-step instructions for a variety of tasks and activities, including
DR500 system connections, channel scanning and selection, setting forced tune times and dynamic ranges,
and instantaneous viewing of programming information.
These exciting options, combined with up to 120 available channels delivering commercial-free, CD-
quality music, provide you the:
Important Information
Throughout this guide you will find two symbols designed to help you identify important information.
These symbols are:
Getting Started
Before you begin using the DR500 Receiver, you need to:
If you are new to satellite communications or are unfamiliar with either the DR500 or the remote control,
you should read the following sections before unpacking or operating this product:
DR500 (E-9)
Rev. C 10/94
•
Variety to select music formats that meet your individual business
image and needs
•
Flexibility to create tailored music programs for multiple environments,
which you can vary by the hour, day, week, or season
•
Ability to maintain complete local control over your music
The note identifies information for the proper operation of your
equipment, including helpful hints, shortcuts, or important
reminders.
The exclamation point identifies information that requires
careful attention in order to prevent equipment damage
and/or injury to the operator.
•
Install the DMX/DBS receiver and equipment, which is
generally done by your local DMX affiliate or a professional
installer.
If your DMX/DBS receiver and equipment have not been installed,
refer to Section 2: Installation.
•
Read the appropriate sections of this User Guide as noted below.
Do not plug in the DR500 Receiver until you have connected the
system and read Section 3: Basic Operations.
•
Section 1 for an overview of the DMX/DBS system and
equipment
•
Section 2 helps you get started and contains a full set of DR500
connection procedures
•
Section 3 for DR500 start-up and basic operations
•
Section 5 to review maintenance procedures or if you encounter
difficulties and need troubleshooting information
•
Other sections as needed
Advertisement
Table of Contents
