Additional DR500 receivers can be added to your system at any time. Each receiver allows you to select
and play one different DMX music channel on a separate audio system. This provides additional stereo
music channels to cover other locations or zones.
This section helps you set up and connect your DR500 system. It provides:
Before you begin using your DR500, it is assumed that the DMX/DBS receiving equipment has been
professionally installed, which includes:
DR500 (E-22)
Rev. C 10/94
Additional DR500 Receivers
Two or more DR500 Receivers may be connected to one antenna to
provide different music channels via separate audio systems. For
additional information regarding the connection of multiple receivers
to one antenna, refer to Section 2.
•
DR500 shipment checklist
•
Tips on selecting the best location for your system
•
Step-by-step instructions for connecting the DR500 Receiver to
your audio system
Before You Begin
•
Setting up the satellite dish and its LNB, correctly positioning
the dish so that it is pointed at the satellite, and connecting it to
the DR500 Receiver (For additional information, refer to
Appendices B and C.)
•
Placing batteries in the remote control unit to allow remote
control operation