Dr500 Back Panel - DMX DR500 User Manual

The back panel of the DR500 has a variety of connectors that are used to link the satellite dish to the
DR500 and your audio system to the DR500. The back panel consists of:
DR500 (E-18)
Rev. C 10/94

DR500 Back Panel

•
Power Input  attaches the DR500 to a 120 VAC wall mount supply
•
RF IN connector  attaches the DR500 Receiver to your local satellite
dish
•
Mono Out connector  attaches the DR500 to a monaural receiver or
amplifier
•
Stereo Out connectors  attaches the DR500 to a stereo receiver or
amplifier. Left is coded white; right is coded red.
•
Digital Out connector (standard Sony/Philips Digital Interface Format
[SPDIF] coaxial output; coded black)  attaches the DR500 to a
digital input of audio equipment that has a coaxial digital input.
•
Data/Control connector  for PC control and diagnostics
•
Serial ID number/bar code label — lists the serial number for this unit