Panasonic CW-XC103HU Service Manual page 16

3. Loosely assemble the sill support using the parts
in 23.
Figure
4. Select the position that will place the sill
support near the outer most point on sill
(See 23)
Figure
NOTE: Be careful when you install the cabinet (frame
guides are broken easily).
5. Attach the sill support to the cabinet track hole in
relation to the selected position using
2 Type A screws in each support (See
6. The cabinet should be installed with a very slight
tilt(about 12.7mm 1 /
outside (See 25).
Figure
Adjust the bolt and the nut of sill support for
balancing the cabinet.
7. Attach the cabinet to the window stool by
driving the screws
millimeters and below.) through the front angle into
window stool 16mm (5/8").
8. Pull each Frame curtain properly to each window
sash track, and repeat step 2.
9. Attach each Frame curtain to the window sash by
using screws (Type C).
(See 26)
Figure
Figure 24
") downward toward the
2
(Type B: Length sixteen
INDOOR
Bolt 3
10 Frame Guide
).
INDOOR
Screw(Type B)
Sill support
—16—
Sill Support
Nut 4
5 Screw(Type A)
Cabinet
OUTDOOR
Screw(Type A)
6 5
Sill support
Front Angle
Screw(Type B)
6
2
Type C
OUTDOOR
2
Figure 23
Figure 24
2
Sash track
Figure 25
7
Figure 26