Location Of Controls - Panasonic KX-NT136 Quick Reference Manual

PAUSE
FWD/DND
(Call Forwarding/
Do Not Disturb)
CONFERENCE
INTERCOM
AUTO ANS/
MUTE
AUTO DIAL/
STORE
TRANSFER
REDIAL
MESSAGE
Headset Jack
* Headset (not included)
Recommended: KX-TCA89
PAUSE: Used to insert a pause when
storing a telephone number. Also used to
enter and exit the personal programming
mode.
AUTO ANS (Auto Answer)/MUTE: Used to
receive an incoming call in hands-free mode
or mute the microphone/handset during a
conversation.
AUTO DIAL/STORE: Used for System/
Personal Speed Dialling or storing
programme changes.
MESSAGE: Used to leave a message
waiting indication or call back the party
who left the message waiting indication.
• For further information, refer to the User Manual of the Hybrid IP-PBX.
LCD (Liquid Crystal Display)
CONF
INTERCOM AUTO ANS
MESSAGE
FLASH/
RECALL
FLASH/RECALL

Location of Controls

Soft Buttons
KX-NT136
FWD/DND PAUSE
AUTO DIAL
MUTE STORE
REDIAL TRANSFER
HOLD SP-PHONE
Microphone
HOLD
SP-PHONE
Message/Ringer Lamp: When you receive an
intercom call, the lamp flashes green, and on
an outside call, the lamp flashes red.
When someone has left you a message, the
lamp stays on red.
FLASH/RECALL: Used to disconnect the
current call and make another call without
hanging up.
Flexible CO Buttons:
Used to make or receive an outside call.
Pressing one of these buttons seizes an idle
outside line automatically. (Button assignment
is required.) Also used as feature buttons.
(Button assignment is required.)
Message/Ringer
Lamp
Flexible CO Buttons
ENTER
CANCEL
Navigator Key
9