Location Of Controls - Panasonic KX-NT265 Quick Reference Manual

Location of Controls

LCD (Liquid Crystal Display)
PROGRAM: Used to enter and exit the
personal programming mode.
TRANSFER: Used to transfer a call to
another party.
INTERCOM: Used to make or receive
intercom calls.
VOLUME Control Button: Used to
adjust the volume.
AUTO ANS (Auto Answer)/MUTE:
Used to receive an incoming call in
hands-free mode or mute the
microphone/handset during a
conversation.
Setting
Ringer volume
While on-hook or receiving a call
Press UP or DOWN.
LCD Contrast/Headset Mode
While on-hook
LCD Contrast
PROGRAM
Headset Mode
All manuals and user guides at all-guides.com
16
15
14
Ring Tone
PROGRAM
Press Twice.
*
The ring tone pattern of patterns 09 to 30 is the same as pattern 01.
AUTO DIAL
0 1
STORE
6 1
— 7 —
AUTO DIAL/STORE: Used for
System/Personal Speed Dialling or
storing programme changes.
Headset Jack
REDIAL: Used to redial the last dialled
number.
FLASH/RECALL: Used to disconnect
the current call and make another call
without hanging up.
HOLD: Used to place a call on hold.
Microphone: Used for the hands-free
conversation.
SP-PHONE (Speakerphone): Used for
the hands-free operation.
Flexible Outside (CO) Line Buttons:
14
Used to make or receive an outside call.
Pressing this button seizes an idle
outside line automatically. (Button
assignment is required.)
Also used as feature buttons. (Button
assignment is required.)
MESSAGE: Used to leave a message
waiting indication or call back the party
who left the message waiting indication.
Message/Ringer Lamp: When you
receive a call, the lamp flashes red.
When someone has left you a message,
the lamp stays on red.
0 1
(CO)
OR
INTERCOM
0 8
Press UP or DOWN.
*
AUTO DIAL PROGRAM
STORE
AUTO DIAL
PROGRAM
STORE