Philips DVDR9000H User Manual page 85

Video settings
Noise red. (reduction)
Sharpness
Audio Output settings
Digital output
HDMI
dvdr9000h_eu_eng2.indd 85 dvdr9000h_eu_eng2.indd 85
System Menu Options
(underlined options are the factory default settings)
Video settings for Pixel Plus only
Use keys to set the level of noise reduction and press OK to
confi rm the setting.
Use keys to adjust the level of picture sharpness and press OK to
confi rm the setting.
Note: The above two options are invisible unless the Pixel Plus feature
is turned on .
(underlined options are the factory default settings)
This setting is only required if you are using the recorder's COAXIAL/
OPTICAL OUT socket to connect other audio/video device.
{ All } – Select this if the connected device has a built-in Multi-
Channel decoder that supports one of the multi-
channel audio format (Dolby Digital, MPEG-2).
{ PCM } – Select this if the connected device is not capable of
decoding multi-channel audio. The system will convert
the Dolby Digital and MPEG-2 multi-channel signals to
PCM (Pulse Code Modulation).
{ Off } – Select this to deactivate the digital audio output. For
example, if you use the AUDIO OUT sockets to
connect this recorder to a TV or Stereo system.
This setting is only required if you are using the recorder's HDMI OUT
socket to connect your TV or other display device.
{ Auto } – Select this if you want to enjoy the multi-channel audio
output through your HDMI connection.
{ Disable } – Select this if the connected device is not able to
output the sound through the HDMI connection or the
playback audio format is not supported by HDMI
connection (e.g. projector, SACD).
Note: Make sure that you have alternative audio connection from the
recorder to your TV or the display device for the sound output (see page
20).
Helpful Hint:
– It is not possible to listen to SACDs or copy-controlled DVD-Audio CPPM
(Content Protection for Playable Media) sources using the HDMI connection.
(continued)
85
2005-10-13 9:18:23 AM 2005-10-13 9:18:23 AM