Philips DVDR9000H User Manual page 83

Digital Channel settings
Digital Ch.
Setup
Video fav.
Radio fav.
Sort video
Sort radio
Digital Ch.
Setup
Digital install
Update install
Full install
Check signal
Video Fav./Radio Fav.
Sort video/Sort radio
Updt Install
Full Install
Check Signal
CHECK DIGITAL SIGNAL QUALITY
Check the antenna connections and position.
Position the antenna to reach best signal quality.
Frequency 222.22
Go back
Signal strength Low
Low
Signal quality
dvdr9000h_eu_eng2.indd 83 dvdr9000h_eu_eng2.indd 83
System Menu Options
Although this recorder selects all the available digital TV channels during
basic installation, you may want to repeat the process later if more
channels become available in your area or if you are reinstalling the
recorder. It also allows you to adapt the digital TV and radio channels to
your personal preference.
A
Press SYSTEM on the remote control. Select { Setup } in the menu
and press NEXTÉ repeatedly to select { Digital Ch. }.
B
Press repeatedly to select the following settings in the menu and
press NEXTÉ to enter its options.
Press OK to mark your favourite digital TV/radio channels for quick
access by using the channel up/down button on the remote control.
You may not agree with the sequence in which the individual TV/radio
channels have been allocated to the programme numbers. You can use
this setting to rearrange the TV/radio channels.
001 ARD
002 TELET
003 ORF2 ---
004 TELET
1) Use keys to select the TV/radio channel that you want to move
and press OK to confi rm.
2) Use keys to shift the TV/radio channel to the desired position
and press OK to swap the TV/radio channel with the TV/radio
channel at the current position.
Note: During sorting, the alphanumeric keypad 0-9 on the remote
control can be used to select a preset number.
It behaves the same as the auto channel search except it only adds new
channels to your existing preset list. New channel refers to a channel
that is currently not installed. It will be added after the last free preset
position. Press OK to start new channels search and install.
Press OK to start digital channels search and install. It will replace all
previously stored digital TV/radio channels.
Press OK to display signal strength and quality information of the digital
tuner. It will help to fi nd the best position of antenna.
Use keys to change the frequency or channel number and press
OK to check the signal quality. Position the antenna at the area where
the maximum signal quality is reached.
High
High
– The TV/radio channels can be accessed using the
+ −
CH on the remote control.
– The TV/radio channels can only be accessed by
pressing the corresponding number button on the
remote control.
004 TELET
005 CHAN
ORF2 006 RTL4 ORF2
007 SBS6
(continued)
004 CHAN
005 RTL4
006 ORF2
007 SBS6
83
2005-10-13 9:18:23 AM 2005-10-13 9:18:23 AM