Step 4: Set-Up The Guide Plus+ System - Philips DVDR9000H User Manual

Step 4: Set-up the GUIDE Plus+ system

Your recorder is equipped with the
GUIDE Plus+ system. This system offers
a free interactive programme guide that
lists all the TV programmes available in
your area. Before you can enjoy this
feature, you have to defi ne your
geographic location and your current
setup devices in order to receive correct
GUIDE Plus+ TV listing data.
IMPORTANT!
To use the GUIDE Plus+ system,
the analogue tuner has to be
installed properly.
A
If an introduction to the GUIDE Plus+
system appears on the TV, read the
contents and press OK to continue.
The GUIDE Plus+ basic setup menu
appears.
Otherwise, press GUIDE on the remote
control, then press
NEXTÉ repeatedly until you select the
{ Setup } menu bar.
B
Press to select { Basic Setup } in the
menu and press OK to access the setup
screen.
TIPS: After completing the setup, leave the recorder in standby mode and turn on your external
receivers overnight to receive the TV listing data.
28
dvdr9000h_eu_eng2.indd 28 dvdr9000h_eu_eng2.indd 28
and press
{ Language } / { Country }
These settings will be taken from the
basic installation set up.
{ Postal code }
Press OK to access the entry menu. Use
keys to enter the local postal code
and use keys to move to previous
or next entry fi eld.
Note: The postal code you enter must be
correct, and must represent a postal code in
the identifi ed country. If not, you will receive
no or incorrect TV listings data.
{ External Receiver 1/2/3 }
Note: If you do not have an external receiver
connected, leave the fi elds as "None" and
press the Red button on the remote control
to exit the menu. Go direct to step H.
You can connect up to three external
receivers (e.g., satellite receiver, cable
box) to this recorder. Complete the
installation of the external receiver as
follows:
a) Use keys to select External Receiver
1, 2 or 3 and press OK.
b) Press OK again to continue. Select the type
of the external receiver and press OK.
{ Cable }
Select this for cable receiver, cable box.
{ Satellite }
Select this for satellite receiver.
{ Terrestrial }
Select this for digital terrestrial decoder
box.
c) Select the service provider from the list and
press OK.
{ None }
Select this if you do not have a provider.
d) Select the brand of your receiver from
the list and press OK.
{ None }
Select this if you do not fi nd your brand.
2005-10-13 9:18:07 AM 2005-10-13 9:18:07 AM