Technical Date Engine And Reverse Gear; Technical Data - Volvo Penta TAMD60A Instruction Book

Engine
Type designation .........................................................................
Number of cylinders .....................................................................
Cylinder bore .......................................................................... mm
Stroke ...................................................................................... mm
Displacement ................................................................. dm
Idling speed ................................................................... r/s (r/min)
Compression pressure at starter motor
speed .......................................................... MPa (kp/cm
Firing order (No. 6 cylinder nearest flywheel) ..............................
Direction of rotation seen from front end of engine ......................
Cylinder liners, type ......................................................................
Valve system ................................................................................
Valve clearance, engine not running, (cold or operating temperature)
Inlet ...................................................................................... mm
Outlet ................................................................................... mm
Inboard engines
Inclination when running, max. degrees ..................................
Weight of engine without reverse gear
AQ-version ............................................................................. kg
Inboard version ...................................................................... kg
Lubricating system
Oil quality according to API system ..............................................
Viscosity above +20°C (68°F) ......................................................
between +20°C and -10°C (68°F and 14°F) ............................
below -10°C (14°F) ...................................................................
all temperatures ........................................................................
Oil capacity
AQ-version and inboard version without
inclination ............................................... dm
Inboard version (inclination 18°) ........... dm
Oil pressure warm engine at operating
speed .......................................................... MPa (kp/cm
Cooling system
Capacity incl. heat exchanger .................. dm
Thermostats begin to open at ............................................. °C(°F)
fully open at ........................................................................ °C(°F)
* With a separate expansion tank
** The thermostats on the 60-series engines open at different temperatures
Hydraulic system
AQD70C, AQD70D and otherwise as optional equipment
Oil quality and viscosity ................................................................
Oil capacity .............................................. dm
38

Technical Data

3 (litre)
2 , p.s.i.)
(25,356/230 r/min)
Wet, replaceable
(lb)
(lb)
3
(Imp.gall.-USgall)
3 (Imp.gall.-USgall)
2 , p.s.i.)
3 (Imp.gall.-USgall.)
68-72 (154-162)
74-78 (165-172)**
78-82 (172-180)
84-88 (183-190)**
3
(Imp. gall-US gall.)
TAMD60A AQD70C
TAMD60B TAMD70C
6
98.4
120
5,48
10.9 (650)
2.5/3.8 r/s
1-5-3-6-2-4
Clockwise
Overhead
0.40
0.45
20
–
– (1852)
670
(1477) (1786)
CD (For Service DS)
SAE 30 Alt. 20W/30
SAE 20/20 W
SAE 10W or 10W/20
SAE 15W/40
20 (4.4-5.3)
13 (2.9-3.4)
0.3-0.5 (3-5, 43-71)
20 (4.4-5.3) 28 (6.2-7.4)
23 (5-6)*
AQD70D
TAMD70D
6
104.77
130
6.73
9.2 (550)
2.35/3.0 r/s
(24,341/180 r/min)
1-5-3-6-2-4
Clockwise
Wet, replaceable
Overhead
0.40
0.55
18
840 850
(1874)
810 820
(1808)
27 (6-7)
16 (3.5-4.2)
30 (6.6-7.9)
74-78 (165-172)
84-88 (183-190)
Same as in engine
7 (1.5-1.9)