Volvo Penta TAMD60A Instruction Book page 42

Turbo-compressor
Manufacturer, type (TAMD60A-AQD70C, TAMD70C) .................
(TAMD60B-AQD70D, TAMD70D) ................................................
Lubrication ....................................................................................
Cooling .........................................................................................
Charging pressure
Charging pressure at 100% engine
load and an ambient air temperatu-
re of approx. +20°C (68°F). Curve 2
applies to pleasure boats (output
according to curve B) and curve 1
for other installations (output accor-
ding to curve C).
A considerably lower charging
pressure is obtained if the engine is
not running at full output.
Reverse gear
Twin Disc model ..........................................................................
Ratios ............................................................................................
Oil quality and viscosity ................................................................
Oil capacity (including cooler) ................... dm
Working pressure at oil temperature 82°C (180°F)
(engaged 30r/s-1800 r/min) ........................... MPa (kp/cm
at cruising speed, min .................................... MPa (kp/cm
Weight ................................................................................. kg (lb)
* 2.5 (25.3,360) for engines with 199 kW (270 hp) propeller shaft output.
SCG, model ..................................................................................
Ratios ............................................................................................
Oil quality and viscosity ................................................................
Oil capacity (incl. cooler) ......................... dm
Oil pressure, normal when running ................ MPa (kp/cm
Weight, (rotation same as engine) ................................... kg (lbs)
(rotation opposite to engine) ......................................... kg (lbs)
40
TAMD60
2.5 WSO
TAMD60
MG502
1.5:1, 2:1, 2.5:1
3 (imp.gall-US.gall) 2.5 (0.6-0.7)
2
, p.s.i.) 2.2-2.4 (21.8-24.0,
310-340)
2 , p.s.i.) 1.93 (19.3, 275)
80 (176)
3
(Imp.gall. USgalls)
2 , p.s.i.)
Holset 3LD-530A/
KKK-K27-2970 N/14.7
From engine lubricating system
From engine fresh water cooling system
Same as in engine
AQD70, TAMD70
Holset 3LD-530A/
2.5 WSO
KKK-K27-3068/14.7
AQD70, TAMD70
MG506
1:1, 1.5:1, 2:1, 3:1
6.5 (1.4-1.7)
2.1-2.2 (21-22.5,
300-320)*
1.9 (19.0, 270)
100 (220)
MRF 350 HDMK3B
1.5:1, 2:1, 3:1
Same as in engine
12.5 (2.8, 3.3)
0.85 (8.5, 121)
175 (386)
170 (375)