Change Code - Siemens SPCK420 User Manual

SPCK420/421/422 LCD-Keypad - User Manual
User programming via the keypad > User menus > USERS > CHANGE CODE

CHANGE CODE

To change a code:
1. Scroll to CHANGE CODE and press SELECT.
A randomly generated code appears.
2. Select new code, if acceptable. Or overwrite by entering a new code and press ENTER.
If the system is set for 5-digit codes, a new 5-digit code must be entered. The system will not accept a code with
fewer numbers than it is set to receive
3. Confirm the new code, press SAVE.
4. Press BACK to return to the previous screen to amend the code.
During the process if the display times out, the old code remains valid.
Where USER DURESS feature is enabled, consecutive user codes (i.e. 2906, 2907) are not permitted, as entering
this code from the keypad would activate a user duress event.
Engineer code should be noted. Forgotten codes are be remedied only by a factory default of the system.
© Siemens Industry - 11-24-2009