Table of Contents
Advertisement
SPCK420/421/422 LCD-Keypad - User Manual
User programming via the keypad > User menus > DOOR CONTROL
DOOR CONTROL
This option allows the engineer to control all the doors of the system.
1.
Scroll to DOOR CONTROL and press SELECT.
2.
Select the door which should be controlled and press SELECT.
3.
Select one of the door states listed below as new door state and press SELECT.
NORMAL
The door is in normal operation mode. A card with the corresponding access rights is needed to open the door.
UNLOCKED
The door is unlocked.
LOCKED
The door is locked. Even if a card with the corresponding access rights is presented, the door stays closed.
© Siemens Industry - 11-24-2009
Hide quick links:
Advertisement
Table of Contents
