Siemens SPCK420 User Manual page 25

SPCK420/421/422 LCD-Keypad - User Manual
User programming via the keypad > Setting and unsetting the system > PARTSET
PARTSET
The PARTSET option provides the following functionality:
Perimeter protection to a building while allowing free movement through the exit and access areas
Exclusion of EXCLUDE A/B zones from protection
Instant activation of alarm on selection of mode; by default there are no exit times associated with PARTSET A/B.
To select PARTSET A/B:
1. Scroll to PARTSET A or PARTSET B.
2. Press SELECT.
The LCD displays PARTSET A/B SET on the bottom line for approximately 10 seconds.
The system fails to set if there is an open or fault condition detected on an alarm zone when the FULLSET or
PARTSET A/B option is selected. The keypad displays the zone number and description.
To set the system, locate the zone and close or fix the fault. Repeat the FULLSET or PARTSET A/B operation.
© Siemens Industry - 11-24-2009