Add An Active Device; Remove An Active Device; Change Pin; Download Phonebook - VTech DDA200BT User Manual

5. Press MENU/SELECT. The handset display Maximum of 2 devices can be connected and then Replace an existing active
device with mobile? Press OK.
6. Press MENU/SELECT. You are prompted to select a device on the paired devices list.
7. Press UP/DOWN to select the device to be replaced, then press MENU/SELECT. The handset displays
Device removed from active devices list and then Connecting Mobile Phone A to the base...
8. Depending on your mobile phone settings, you may need to press a key on your mobile phone to confirm the connection.
When you successfully replace and connect an active device with a paired device, the handset displays Device connected.

Add an active device

You can have a maximum of two devices on the active devices list.
1. In standby mode, Press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Active devices.
3. Press MENU/SELECT then UP/DOWN to select empty position.
4. Press MENU/SELECT. The display shows Add.
5. Press MENU/SELECT then UP/DOWN to select a device from the paired devices list.
6. Press MENU/SELECT. The handset displays Device added to active list and then Connecting Mobile Phone B to the base... If
there are no paired devices to add, the handset displays All paired devices are devices already connected.
7. Depending on your mobile phone settings, you may need to press a key on your mobile phone to confirm the connection.
When you successfully add and connect an active device, the handset displays Device connected.

Remove an active device

You can remove an active device from the active devices list.
1. In standby mode, press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Active devices,
3. Press MENU/SELECT then UP/DOWN to select the desired device.
4. Press MENU/SELECT then UP/DOWN to select Remove active.
5. Press MENU/SELECT. The handset displays Device removed from active list.
Note: Even though the active device is removed from the active devices list, it is still on the paired devices list

Change PIN

You are required to enter a PIN when establishing a Bluetooth connection. The default Pin of your DDA200BT is 0000.
1. In standby mode, press MENU/SELECT then UP/DOWN to select Bluetooth.
2. Press MENU/SELECT then UP/DOWN to select Change PIN,
3. Press MENU/SELECT. The display shows ENTER NEW PIN and the existing PIN.
4. Use the keypad to enter a new four-digit code. (See writing tips in page 23).
5. Press MENU/SELECT to save.

Download phonebook

You can download up to four mobile phone phonebooks to your DDA200BT telephone system via Bluetooth wireless technology.
Each downloaded mobile phonebook can store up to 1,500 entries with up to 30 digits for each phone number and 15
characters for each name.
Before downloading the phonebook, make sure the mobile phone is paired to your DDA200BT and on the active devices list.
Check your mobile phone User instructions to confirm that phonebook transfer is an available option.
Place your mobile phone next to theDDA200BT when you download a mobile phone phonebook to your DDA200BT

To download a mobile phone phonebook

1. In standby mode, press MENU/SELECT then UP/DOWN to select Bluetooth.
2. In standby mode, press MENU/SELECT then UP/DOWN to select Download PB.
3. Press MENU/SELECT.
If there is no mobile phone paired to the system, the handset displays No mobile device paired. Press OK to add

mobile.
4. Press UP/DOWN to select a desired device, then press MENU/SELECT.
If the selected device is on the paired devices list but not on the active devices list, the handset displays No mobile on

active devices list. Press OK to add.
If the selected device is on the active devices list but disconnected, the handset displays Not connected. Place it next

to the base to connect mobile. Press OK.
If the selected device's phonebook has already been downloaded to DDA200BT before, the handset displays Mobile

Phone A Last update: MM/DD/YY To continue, press OK. If you press MENU/SELECT to continue the downloading
process, the stored phonebook for that particular mobile phone is erased and replaced with the current mobile phone
phonebook. The handset then displays Phonebook Mobile Phone A will be erased. To download press OK. Press
MENU/SELECT to confirm. If you have edited the downloaded entries (page xx), those changes are lost.
17