Surface Clarity - Lowrance LCX-17M Operating Instructions Manual

Sonar Menu with Stop Chart command selected.

Surface Clarity

The markings extending downward from the zero line on the chart are
called "surface clutter." These markings are caused by wave action,
boat wakes, temperature inversion and more.
The surface clarity control reduces or eliminates surface clutter signals
from the display. It does this by changing the sensitivity of the receiver,
decreasing it near the surface and gradually increasing it as the depth
increases.
There are three levels of surface clarity available: low, medium, or high.
It can also be turned off. The default level is off.
To adjust the Surface Clarity level:
1. From the Sonar Page, press |↓ to | .
MENU S F ENT
ONAR EATURES
Sonar Features menu with Surface Clarity selected.
→
2. Press to |
S C ENT.
URFACE LARITY
↓ or ↑ to select clarity level|
| | .
3. Press EXIT EXIT EXIT
91