Set A Waypoint By Projecting A Position - Lowrance LCX-17M Operating Instructions Manual

1. Press |→ to
WPT
2. Press ↓ or ↑ to
3. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press
4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT

Set a Waypoint by Projecting a Position

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position could be a
waypoint map feature, an item from your waypoint list or a location
from the Points of Interest list.
1. Press |→ to
WPT
2. Press ↓ to
P
3. Press → to
map feature or Point of Interest. When the point has been selected,
press and the point's position appears as the reference position.
ENT
4. Press ↓ to
then press → to the next character and repeat until the distance is
correct. Press
5. Press ↓ to
then press → to the next character and repeat until the bearing is
correct. Press
6. Press ↑ to
simply save the new projected waypoint by pressing
can edit the waypoint. (Press
begin navigating to the new waypoint.)
S
UBCATEGORY
A P
VERAGE OSITION
| or you can edit the waypoint.
EXIT
S
UBCATEGORY
P
ROJECTED OSITION
C R
HOOSE EFERENCE
. Press ↑ or ↓ to change the first character,
|
D ENT
ISTANCE
.
ENT
. Press ↑ or ↓ to change the first character,
|
B ENT
EARING
.
ENT
| . The Edit Waypoint menu appears. You can
P ENT
ROJECT
column|↓ to
|press → to
|
ENT
to create and save the waypoint.
ENT
column|↓ to
| |→ to
ENT
. Use ↑ and ↓ to select a waypoint,
|
ENT
|
EXIT ENT
140
| .
N ENT
EW
C
REATE
| .
N ENT
EW
| .
C ENT
REATE
EXIT
if you want to immediately
| .
ENT
| or you
EXIT