Table of Contents
Advertisement
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS
receiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. You have the
option of turning off the WAAS Acquired/Lost alarm without affecting
how the unit uses WAAS. Here's how:
1. Press
MENU|MENU|↓
2. With the option highlighted, press
check it (turn on). After the option is set, press
the page display.
3. You can return to this command and press
feature on.
Software Version Information
From time to time, Lowrance updates the operating system software in
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site, www.lowrance.com.
These upgrades make the unit perform better or introduce a new
feature or function. You can find out what software version is running
in your Unit by using the Software Information command.
Software Information command (left); Software Information (right).
1. Press
MENU
2. Read the information displayed on the screen.
3. To return to the last page displayed, press
Sounds and Alarm Sound Styles
Sounds triggered by key strokes and alarms can be adjusted:
You first press
to
GPS S
|
|↓
MENU
to S
MENU|MENU|↓ to S
|
ENT|↓
ETUP
ENT
|
S
ENT|
YSTEM
ETUP
|
ENT
OUNDS
163
to
S
WAAS A
HOW
to uncheck it (turn off) or
EXIT|EXIT
again to turn the
ENT
↓
to S
OFTWARE
EXIT|EXIT|EXIT.
.
.
LARM
to return to
|
.
I
ENT
NFO
Hide quick links:
Advertisement
Table of Contents
