Table of Contents
Advertisement
You also may switch the Time Format between 12 and 24 hour options.
The Date Format also may be modifed between three options:
Month/Day/Year, Day/Month/Year and Year/Month/Day.
Time Settings Menu.
At the top right of the menu is the
button. This feature
C
DST
ONFIG
allows your unit to automatically adjust with the time change caused
by Daylight Saving Time (you should only have to set it once). You may
select which set of rules matches DST in your region, or simply accept
the default.
Once you have each field set the way you want, press
repeatedly
EXIT
until you return to the previous page.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS
receiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. You have the
option of turning off the WAAS Acquired/Lost alarm without affecting
how the unit uses WAAS. Here's how:
1. Press
to
|
to
.
MENU|MENU|↓
GPS S
ENT|↓
S
WAAS A
ETUP
HOW
LARM
2. With the option highlighted, press
to uncheck it (turn off) or
ENT
check it (turn on). After the option is set, press
to return to
EXIT|EXIT
the page display.
3. You can return to this command and press
again to turn the
ENT
feature on.
159
Hide quick links:
Advertisement
Table of Contents
