Kenmore 119.163018 Use & Care Manual page 16

Install
Side Shelf Frame to Firebox. [] Unscrew the 2 Phillips Head bolts 1/4" from the upper left and right corner holes in the right side of
the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side
shelf frame.
[] Slide the upper holes of the side shelf frame over the heads of the 2 Phillips Head Bolts and drop
down.
[] Use 2 Phillips Head Bolts (M6x16mm) and 2 Washers (M6) to attach the lower holes in the side
shelf frame to the firebox as shown in Inset 2. Tighten the upper bolts after the 2 lower bolts are
tight.
[] Use 2 Phillips Head Bolts (M4x8mm) and 2 Lock Washers (M4) to attach the lower holes in the Side
Shelf Front Panel to the firebox. See Inset 3,
Inset
1
Inset
2
Phillips Head Bolt M6x16mm
Qty: 2
©
Lock Washer: M6
Qty: 2
Phillips Head Bolt M4x8mm
Qty: 2
©
Lock Washer M4
Qty: 2
Inset 3
_I_ Install Heat Diffuser, Cooking Grates, and Warming Rack
[] Place the Heat Diffuser into the firebox between the ridges in the front and back panels. See Inset
1,
[] Place the Cooking Grates into the firebox. The grate bottoms have a small knob on each corner. See
Inset 2,
[] Insert the Warming Rack into the holes of firebox side panels as shown, See Inset 3.
Inset 1 Inset 3 Inset 2