Qty - Kenmore 119.163018 Use & Care Manual

Attach Side Burner Control Panel to Hain Control Panel
[] Use 2 Phillips Head Bolts (M4x8mm) and 2 Lock Washers (M4) to attach the Side Burner
Control Panel to the firebox as shown.
Phillips Head Bolt M4x8mm
Qty: 2
©
Lock Washer: M4
Qty:2
Attach Side Burner Control Knob and Side Burner Ignition Wire
[] Slide the side burner ignition wire through the hole located in the lower left front corner of the
Firebox Assembly and over the side burner igniter connector. See Insets 1 and 2.
[] Push the Control Knob onto the valve stem. See Inset 3.
Side Burner Control Knob
qty: 1
Inset 2
Inset 3
1
Inset 1
15