Download
Share
Print this page
Kenmore 119.16126010 Use And Care Manual
  1. Manuals
  2. Brands
  3. Kenmore Manuals
  4. Grill
  5. 119.16126010
  6. Use and care manual

Kenmore 119.16126010 Use And Care Manual

Liquid propane gas grill
Hide thumbs

Advertisement

Quick Links

Download this manual
Use & Care
Guide
®
Liquid
Propane
Gas Grill
Sears
Model
No:
119.16126010
Safety
Parts
Use
and
Care
Assembly
Espa_ol,
Pg.
27
This
Grill
is for
Outdoor
Use
Only
•
Read
and
follow
all Safety,
Assembly,
and
Use
& Care
Instructions
in this
Guide
before
assembling
and
cooking
with
this
grill.
•
Failure
to follow
all
instructions
in
this
Use
& Care
Guide
may
lead
to
fire
or explosion,
which
could
result
in property
damage,
personal
injury
or death.
Grill
Information
Center
Missing
Parts?
Assembly
Questions?
Operation
Problems?
Before
returning
grill to store,
call 1-800-933-0527
Tools
needed
for assembly:
Protective
work
gloves
and eyewear
Phillips
head screwdriver
(included
in hardware
pack)
SAVE
THESE
INSTRUCTIONS!
See our
extensive
assortment
of outdoor
living
products
on-line
at
www.sears.com
and
www.kmart.com
Sears
Brands
Management
Corporation,
Hoffman
Estates,
IL 60179
U.S.A.
© 2010
Sears
Brands,
LLC
Printed
in China
B10PG23-B

Advertisement

loading

Related Manuals for Kenmore 119.16126010

Summary of Contents for Kenmore 119.16126010

  • Page 1 Use & Care Guide ® Liquid Propane Gas Grill Sears Model 119.16126010 Safety Parts Care Assembly Espa_ol, This Grill is for Outdoor Only Grill Information Center Missing Parts? Assembly Questions? Operation Problems? Before • Read follow all Safety, Assembly, returning grill to store, &...

  • Page 2: If You Smell Gas

    All warranty coverage applies only if this grill is used in • Model Number 119.16126010 the United States. Serial Number This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

  • Page 3: Pre-Assembly

    Call Sears at 1-800-4-MY-HOME® scratches. (1-800-469-4663) for a Kenmore replacement • Once all parts are removed and unpacked, gas hose assembly. use the Hardware and Part Diagrams to ensure items are included and free of damage.
  • Page 4 Phillips Head Bolt M6x25mm Grill Transport Handle Heat Shield Qty: 2 pcs Qty' 2 pcs Flat Head Bolt M6×25mm Phillips Head Screwdriver Qty: 4 pcs Qty: 1 pc Step Bolt Battery Size AA Qty: 4 pcs Qty: 1 pc Propane Tank Support Chain Hook...
  • Page 5 Part Description Hood Assembly Hood Bolt Assembly Thermometer Thermometer Seat Firebox Assembly Gas Manifold Assembly Side Shelf Right Front and Left Back Support Side Shelf Left Front and Right Back Support Control Panel Left Support Regulator and Hose Assembly Control Panel Right Support 'T' Burner Electronic...
  • Page 6 Part Description Electrode Electronic Igniter Button Firebox Assembly Support Electronic Igniter Wire Set Hood Bumper Cabinet Side Panel Cabinet Front Panel Cabinet Frame Cabinet Base Caster Adjustable Foot Bottle Opener Bottle Cap Catcher Propane Tank Support Chain Hook Propane Tank Support Chain Left Shelf Assembly Hardware Pack...
  • Page 7 iil i _ ii i ¸¸¸¸_¸¸¸¸¸¸'i_ ©...
  • Page 8 Install Cabinet Left Side Panel and Right Side Panel Attach Cabinet Left Side Panel to the Cabinet Base using 1 Phillips Head Bolt (M6xlOmm). Attach Cabinet Right Side Panel to the Cabinet Base using i Phillips Head Bolt (M6xiOmm), Do not fully tighten any bolts at this time, Phillips Head Bolt M6xiOmm...
  • Page 9 Install Cabinet Frame Slide Cabinet Frame into position between side panels as shown. Attach the Cabinet Frame to the Cabinet Base Panel using 2 Phillips Head Bolts (M6xl0mm), Attach the Cabinet Frame to the Cabinet Left and Right Side Panels using 5 Washer Head Bolts (M4xl0mm),Now ensure...
  • Page 10 Hang Bottle Cap Catcher Hang Bottle Cap Catcher on the Cabinet Front Panel. Install Hood and Firebox Assembly Remove regulator and hose from underside of Hood and Firebox Assembly. Remove packing from regulator. With the aid of an assistant, place Hood and Firebox Assembly onto the Cabinet, and attach...
  • Page 11 Attach Hood and Firebox Assembly to Cabinet Front Attach the Hood and Firebox Assembly to the front of the Cabinet Side Panels using 2 Phillips Head Bolts (M6xl0mm), Phillips Head Bolt M6xl0mm Qty: 2 Install Grease Pan Bracket and Grease Insert the Grease Pan Bracket...
  • Page 12 Install Control Knobs Press 3 Control Knobs onto the valve stems as shown. Install Side Shelf Supports to Firebox Attach Side Shelf Right Front Support and Side Shelf Right Back Support to Firebox using 4 Flat Head Bolts (M6x12mm). Attach Side Shelf Left Front Support and Side Shelf Left Back Support...
  • Page 13 Attach Side Shelf Position Shelves brackets to the inside of the Shelf supports. Attach Left and Right Shelves to Firebox with two Step Bolts (M6) each. Securely tighten bolts. Step Bolt M6 Qty: 4 Side Shelf Operation Pull up on the Left Side Shelf and slide down over the support pins to secure in the upright position.
  • Page 14 nstall Heat Diffusers, Cooking Grates, Warming Rack Insert the Heat Diffusers into the firebox by placing them into the indentations along the front and back of the firebox, See Figure 1, Place the Cooking Grates into the firebox, See Figure 2, Insert the Warming Rack into the slots of firebox...
  • Page 15 Grill Transport Handle Attach Transport Handle and 2 Handle Heat Shields to the back of the Firebox using 4 Flat Head Bolts (M6x25mm). Grill Transport Handle Heat Shield Qty: 2 Flat Head Bolt M6x25mm Qty: 4 Install Regulator Hose Support Chain Attach the Regulator...
  • Page 16 Place and Secure LP Cylinder into the Cabinet Be sure the LP cylinder is "OFF" by turning the hand wheel clockwise until it stops. Place the LP cylinder down into the tank support hole in the bottom of the cabinet. Be sure the grill burner controls...
  • Page 17 Congratulations - Assembly is now complete! Remove any additional labels or packing material from the grill except the CSA label. Be sure to clean all foam packing material out of all areas. Level your grill by adjusting the 2 front feet.

  • Page 18: For Your Safety

    YournewKenmore P atioGrillhasbeendesigned and Your new gas grill operates on LP (Liquefied manufactured to highqualitystandards. It will Petroleum) gas. LP gas is odorless, colorless, provide youwithmanyyearsof enjoyment w itha non-toxic when produced. You can smell LP gas as it minimal a mount o f maintenance. Please keepin has been given an odor similar to rotten...
  • Page 19 • Never f ill a cylindermorethan80%full by LP CYLINDER LEAK TEST weight,Volume will varyby temperature. An A leak test should be done each time a cylinder emptycylinderweighs approximately 1 8 pounds refilled or exchanged. Do not smoke or use any type (8.2kgs).
  • Page 20 he regulator must enter cylinder valve in a straiqht line. Thepressure regulator a ndhoseassembly provided withthis gasgrill mustbeused. T hisregulator i s set for anoutletpressure of 11 inches watercolumn. Replacement pressure regulators andhose assemblies m ustbethosespecified in the partslist. Yourregulator i s equipped witha Q.C.C. Type1 quick connect s ystem.
  • Page 21 LEAK TESTING THE REGULATOR! VALVES! HOSES! AND CONNECTIONS Ensure LP cylinder valve burners "OFF". DO NOT USE THE GRILL if you cannot stop a leak. Be sure the LP cylinder valve is closed. Ensure LP cylinder is connected to the the LP cylinder is still leaking,...
  • Page 22 is working. If burner does light within seconds, turn burner control knob to "OFF". Wait 5 minutes for the to clear repeat lighting procedure. BEFORE AND AFTER LIGHTING Repeat step 4 to light other burners. • Ensure your grill is located on a level surface Follow...
  • Page 23 • Do not clean any part of your barbecue grill in a • Batteries will deteriorate over time. This self-cleaning oven. can cause their casings to leak. • Do not use oven cleaners, abrasive kitchen • Remove the battery from the electronic ignition cleaners, cleaners...
  • Page 24 Burner Flames When to Look for Spiders You should inspect the burners at least twice a year Always inspect the burner flame after lighting. or immediately after any of the following conditions good flame should be primarily blue with a yellow and have a minimal amount of noise.
  • Page 25 KNOWING WHEN THE FOOD IS DONE Welcome t o the worldof grilling.Whether y ou're We strongly recommend using a meat thermometer. alreadyanestablished g riller,or just startingout, Food cooked on a grill can brown very fast on the yournewgrillshouldbringyoumuchenjoyment a nd outside, well before it's cooked...
  • Page 26 steakonceduringcooking. 11.Usetongsratherthana forkwhenturningthe foodonthe grill. Less juicewill belostthatway. BURNER WILL NOT LIGHT 12.Knowyoursauce andwhento apply.Oiland vinegarbased sauces canbebrushed on any 1. Gas supply is turned off. Turn on gas at LP time.Sugarbased sauces likebarbecue sauce cylinder. shouldbeapplied duringthe lastfewminutesof Out of propane. Check to be sure you still have cooking.

  • Page 27: Excessive Flare-Ups

    Opening the control knob before turning on the LP gas at the cylinder. Turn on the gas at the LP cylinder first before turning on a control knob to light. Can I convert my gas grill from one fuel source to another? Improper purging...
  • Page 28 Felicitaciones por su compra inteligente. Su nuevo Congratulations onmaking a smartpurchase. Your producto Kenmore® viene dise_ado y manufacturado newKenmore <R_ product i s designed and para confiables operaciones por amos. Pero, como manufactured for yearsof dependable o peration. B ut...
  • Page 29 Your Home For expe_ troubleshooting and home solutions advice: iiiiiiiiii For repair- in your home -of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories owner s manuals that you need to do-it-yourself.