Download Print this page

Step 2: Dvr Configuration - HIKVISION DS-8100HFI-ST Quick Manual

Pos setup on i/o server and dvr

Hide thumbs Also See for DS-8100HFI-ST:

Menson Qi

Step 2: DVR Configuration

1. Upgrade DVR by customized firmware.

Download the customized firmware to USB disk, and plug it in DVR. Click

Maintenance>Upgrade>Local Upgrade to upgrade DVR.

Note: The upgrade process could be also completed via iVMS-4200 or browser.

Please refer to the corresponding user manual for more information.

2. Configure POS communication settings.

Go to Configuration > POS to set parameters of POS server.

For example:

For POS server 1(IP: 172.6.16.249) the Local Receive Port of DVR is 14006 and POS

Server IP is 172.6.16.249. The Port No.1 of POS server 1 is 9001 (Please refer to the

setup on I/O server in Step1), and select a camera (Such as Analog 1) for this Port to

build up the relationship between POS and camera; The Port No.2 of POS server 1 is

9002, and we select camera Analog 2.

5 / 12

Ds-7300hfi-sh