Advertisement
required for each page. They can be all saved once.
a) Go to page 'Network Settings' and setup the IP, Sub mask and Gateway
accordingly.
b) Go to page 'Serial settings', highlight the POS port, click 'Settings' and setup
the communications parameters accordingly for each port.
c) Go to page 'Operating Settings', highlight the POS port, click 'Settings' and
setup the operation parameters according.
i.
For example for Port No. 1 of POS server 1, the Destination IP Address
is the IP of DVR (Such as 172.6.16.248), and the Destination Port is the
receiving port of DVR (Such as 14006), the Local Port is the port to
identify the POS machine (Such as 9001). And operation mode should
be TCP Client Mode for POS port.
Tip: The above parameters would be also required to setup on the DVR for
communications, the details can be found in Step2.
3 / 12
Menson Qi
Advertisement
