Kenmore DRAWER DISHWASHER 465.1332 Use And Care Manual page 19

CARE C i
One-piece rack
1. Make sure that the dishwasher drawer is cool before
you clean the coarse filter plate and coarse filter cup.
2. Pull drawer out to its full extension. Remove plate
tine insert from rack and set aside.
3. Wipe the coarse filter plate with a damp cloth in a
clockwise motion.
4. To remove the coarse filter cup, unscrew the small
cap, turning in a counterclockwise motion. Lift and
remove the coarse filter cup out of the drawer.
5. Empty the cup of hard objects and food soil. Rinse
cup under hot water.
6. Place the coarse filter cup back into the coarse filter
plate and tighten the cap, turning in a clockwise
motion. Make sure the coarse filter cup is flush with
the coarse filter plate.
7. Replace the plate tine insert.
Long Term Storage/Moving
1. Fill detergent cup with a fresh-scented dishwasher
detergent or baking soda, close the lid and select
the Quick Wash cycle. Allow the dishwasher to
complete the cycle.
2. Turn the water supply off and drain the dishwasher.
Press Cancel/Drain once to activate the drain.
3. Operate the drain twice to ensure most of the water
is removed.
4. Disconnect the electrical supply and prop open the
drawer.
5. Be sure dishwasher is clean and dry.
When turning the water supply to the home off,
the water shut-off at the dishwasher must be
turned off as well.
18