Sensor Dry; Child Lock; Sani-Rinse; High Temp Wash - Kenmore DRAWER DISHWASHER 465.1332 Use And Care Manual

CYCLES
SOl]SOt D_ (select models)
Sensor technology allows the dishwasher to
provide optimum drying performance based on the
water temperature reached during the wash cycle and
use of rinse aid. Rinse Aid helps reduce drying time.
Drying performance will improve after several washes
using rinse aid.
At the end of the selected cycle, intermittent drying
will turn the fan on every hour for five minutes for up
to 10 hours or until the drawer is opened for more
than 30 seconds.
Child Lock
The control touchpads can
c fi ¢
be locked to prevent small Hold 3See.For Lock
children from starting and stopping the dishwasher or
from changing the cycle and option selections. If this
feature is activated between cycles, the dishwasher
cannot be operated until the controls are unlocked.
The controls can not be locked after a cycle or delay
has started.
Setting the Child Lock:
1. Press the Sensor Dry or Lock pad and hold for
three seconds.
2. An indicator light next to the lock graphic will
illuminate when the controls are locked.
To cancel:
1.Pressthe Sensor Dry or Lock pad and hold for
_ree seconds.
2. The indicator light will go off.
Notes:
If a cycle or option pad is pressed after the
controls have been locked, the indicator light next
to the lock graphic will flash three times and the
dishwasher will beep four times.
• This option does not lock the drawer, only the
dishwasher controls.
Sani-Rinse
(select models)
Sani-Rinse increases the water temperature in the
final rinse, raising the temperature to meet sanitization
requirements. The Sanitized indicator light to the far right
of the control panel will not light if all requirements for
sanitization have not been met. Sani-Rinse can be
selected with Normal Wash and Smart Sense" cycles.
important: Sani-Rinse is mandated when using an
Anti-Bacterial cycle and cannot be cancelled.
To select, press the Sani-Rinse pad after making your
cycle selection. To cancel this option, press the
Cancel/Drain pad.
High Temp Wash
This option adjusts cycles to provide additional
wash time and temperature to aid in the removal of
heavy and/or baked on soils. Selecting this option will
extend wash time by increasing water temperature
and/or the number of fills in the wash cycle.
To select, press the High Temp Wash pad after
making your cycle selection. To cancel this option,
press the pad again, or press the Cancel/Drain pad
to cancel all selected cycles and options.
12