Table of Contents
Advertisement
11c.
1. Remove the disposer knockout plug.
Do not cut end of drain hose
2. Attach drain hose 0 to disposer inlet
0 with spring-type clamp O.
This connection O MUST be before
drain trap _) and at least 20" (50 8cm)
above the floor where dishwasher will
be installed. Go to step 12
11d.
1 Cut end of drain hose 0 (do not cut
ribbed section)
2 Attach dram hose to waste tee
with 1-1/2-2" (3.8-5cm) screw
clamp* _).
Th_s connectmn Q MUST be before
drain trap _) and at least 20" (50 8cm)
above the floor where dishwasher will
be installed Go to step 12.
* Parts avatlabie from local plumbing
supply stores.
HELPFUL TIP:
To reduce the vibration of the
hose, insert a cloth, putty or
caulking
compound in hole
around drain hose.
12.
l
Insert drain hose 0 into hole cut in
cabinet to the front center of opening
where drain connection will be made.
12
Advertisement
Table of Contents
