Other Settings - Panasonic SC-HT340 Operating Instructions Manual

Using on-screen menus (continued)
Functions Menu (continued)
Subtitle
To select the subtitle language
• On +R/+RW, a subtitle number may
with discs that contain subtitle
on/off information (Subtitle on/off
information cannot be recorded using
Panasonic DVD Recorders).

Other Settings

Play
Speed
To change play speed
– from "x0.6" to "x1.4" (in 0.1-unit steps)
• Press [3, PLAY] to resume normal
• After you change the speed.
• This function may not work
7 Play Menu
Repeat
(Only when the elapsed play time
can be displayed.)
During playlist play:
Off → Scene → Playlist
Off → Content → Group
*
A-B Except
Repeat
To repeat a specifi ed section
Press [ENTER] at the starting and
ending points.
Press [ENTER] again to cancel.
20
RQT8043
(with multiple subtitles)
(SVCD only)
be shown for subtitles that are not
displayed.
"On" or "Off" appears only
playback.
– Dolby Pro Logic II and Sound
Enhancement have no effect.
– Audio output switches to
2-channel stereo.
– Sampling frequency of 96 kHz is
converted to 48 kHz.
depending on the disc's recording.
: Off → Chapter → Title
: Off → Program → All
: Off → Track → All
:
*
: Off → Group *
"All" is displayed during program or
random play.
(Still picture part)
Marker
(VR)
Angle
Rotate
Picture
Slideshow
Other
Settings
7 Play Menu (continued)
Marker
*
Advanced
Disc
Review
To recall a marker recorded
on DVD-Video recorders
Press [5, ∞] \ Press [ENTER]
(with multiple angles)
To select a video angle
To rotate pictures
To turn the slideshow on or off
To change the slideshow speed
– from "1 Fast" to "5 Slow" (in 1-unit
steps)
(\ see below)
Except
To mark up to 5 positions to play
again
Press [ENTER]. (The unit is now
ready to accept markers.)
To mark a position:
Press [ENTER] at the desired point.
To mark another position:
Press [2, 3] to select "✱" \
Press [ENTER]
To recall a marker:
Press [2, 3] \ Press [ENTER]
To erase a marker:
Press [2, 3] \ Press [CANCEL]
• This feature does not work during
program and random play.
• Markers you add are cleared when
you open the disc tray or switch the
main unit to standby.
(Except +R/+RW)
(Except still picture part and when
playing a play list)
Allows you to browse the disc
contents and start playing from the
selected position. You can select
either "Intro Mode" or "Interval Mode"
in "Advanced Disc Review" in the
"Disc" tab (\ page 23).
Example:
Press [3, PLAY] when you fi nd a title
or program of your choice.
• This may not work depending on
the disc and the play position.