1
Connect to the antennas.
■ AM loop antenna
Stand the antenna
up on its base.
■ FM indoor antenna
Tape the antenna where reception is best.
2
Connect to the television's SCART terminal.
Do not connect the unit through a video cassette recorder.
•
Due to copy guard protection, the picture may not be displayed correctly.
• Turn the television off before connecting, and refer to the television's operating instructions.
■ Television with SCART terminal
Using the SCART (AV) terminal
To improve picture quality, you can change the video signal output from the SCART (AV) terminal from
"Video" to either "S-Video" or "RGB" to suit the type of television you are using. Select "S-Video" or "RGB"
from QUICK SETUP (\ page 13).
White
Black
Red
Television
(not included)
Adhesive tape
SCART cable
(not included)
9
RQT8043