Electrolux EAW05E3AJW Instruction Manual page 23

43 electrolux installation
Extend the side panels out against
the window frame (FIG. 7A for
wooden windows, FIG. 7B for Vinyl-
Clad windows).
Place the frame lock between the
frame extensions and the window sill
as shown (FIG. 8A for wooden
windows, FIG. 8B for Vinyl-Clad
windows).
Fig. 7A
Window
frame
Wooden Windows
Fig. 7B
Vinyl-Clad Windows
Fig. 8A
Wooden Windows
Drive locking screws
1. For wooden windows:
Drive 3/4" (19 mm) locking screws
through the frame lock and into
the sill (FIG. 9A).
NOTE: To prevent window sill
from splitting, drill 1/8" (3mm) pilot
holes before driving screws. Drive
3/4" (19 mm) locking screws
through frame holes into window
sash (FIG. 9B).
2. For Vinyl-Clad windows:
Drive 3/4" (19 mm) locking screws
through the frame lock and into
the window sash (FIG. 9B).
NOTE:Before driving the screws,
use a drill to drill 5 holes through
the holes in the frame lock and
frame extensions into the
windows sash as shown ( FIG.
9B).
installation electrolux 44
Fig. 8B
Vinyl-Clad Windows
Fig. 9A
Fig. 9B