Material Supplied And System Charge - Carrier 42PQV Installation Manual

42PQV/38VBH

Material supplied and system charge

Material supplied
The following installation accessories are supplied with unit. Use them as required.
NAME and shape
Wall hanging bracket
Screws 4xL10
Screws anchors and screws 6xL25
Washers Ø 12
Drain fitting
Mounting rubber
The following field-supplied items are required to complete the installation.
Name
Connection pipe
Wall sleeve
Wall cap
Finishing tape
Fastening tape
Pipe insulation
Drain hose
Sealer putty
- Power supply cable
- Electrical connecting cable
between indoor and outdoor unit
System charge
Refrigerant
Size
charge (g)
009 720
012 1100
1. This appliance is designed to be used without additional refrigerant charge up to 10m for 42PQV009 and 15m for 42PQV012.
There is no need to charge and extract additional refrigerant according to the connecting pipe length within maximum pipe length.
2. In case of refrigerant charging due to refrigerant leak or service, charge exact amount of refrigerant using scale after evacuate the unit
with vacuum pump.
3. For reference, discharge/suction pressure at various temperature conditions and a rated compressor speed are provided service
manual.
Never charge and extract the refrigerant depending on discharge/suction pressure. This unit is inverter system whose compressor
speed is variable.
Q.ty
1 For indoor unit installation.
2 For fixing unit and hanging bracket
4 + 4 + 4 For wall hanging bracket installation.
1 For drainage of outdoor unit.
4 For outdoor unit installation.
009: Ø (3/8") 9.52 mm (Gas) / Ø (1/4") 6.35 mm (Liquid)
012: Ø (1/2") 12.7 mm (Gas) / Ø (1/4") 6.35 mm (Liquid)
PVC film
I.D. 16-17 mm
H07RN-F or higher
Cable type: H07 RN-F, synthetic rubber insulation with Neoprene coating,
according to EN 60335-2-40 codes.
Suitable up Maximum pipe lenght
to (m)
10
15
Use
Specification
Maximum pipe elevation
(m)
10
15
E N G L I S H
(m)
8
10
GB - 5