Step 5: Configure Your Broadband Internet Connection; Windows 7; Windows Vista - PSC DSL Self Install Manual

Step 5: Configure your Broadband Internet Connection

Router Note: Even if you are planning to use a router to share your
connection to more than one computer, most router setup instructions
require you to start with your computer already connected to the Internet
in order to determine the type of connection you have. You should
follow the instructions below to set up your broadband connection. Once
you have established your connection, proceed with setting up your
router.

Windows 7

1. Click "Start menu".
2. Click "Control Panel".
3. Click "Network & Internet".
4. Click "Set up a connection or network".
5. Select "Connect to the Internet" -> Click "Next".
6. Click "Broadband (PPPoE)".
7. Type in your user name. Usernames are all lower case letters
and/or numbers, do not contain spaces, and do not include
"@psci.net".
8. Type in your password. Passwords may be in upper or lower
case letters and/or numbers, but must match exactly the
password saved for you by PSC.
9. ISP name is "PSC".
10. Click "Connect".
11. If successful you will see a message that the connection is ready
and you can click "Close".

Windows Vista

1. Click "Start menu".
2. Click "Control Panel".
3. Click "Network & Sharing Center".
4. Click "Set up a connection or network".
5. Select "Connect to the Internet" -> Click "Next".
6. Click "Broadband (PPPoE)".
7. Click Connect.
8. Type in your user name. Usernames are all lower case letters
and/or numbers, do not contain spaces, and do not include
"@psci.net".
9. Type in your password. Passwords may be in upper or lower
case letters and/or numbers, but must match exactly the
password saved for you by PSC.
PSC DSL Self-Install Guide
- 9 -