Other Troubleshooting Questions - PSC DSL Self Install Manual

name. If not, click the connection to highlight; then click the Set
Default button.
6. Click APPLY (if available), then click OK.
7. At the top of the Internet Explorer window, click the Refresh
button, or press the F5 key on your keyboard.
 If prompted to "Connect or Work Offline"
button. Your PSCDSL connection window should appear. Click
the Connect button at the bottom of the window to log in to your
DSL connection.
If a Connection window does not open, contact PSC Technical Support
(page 19) for further assistance.

Other Troubleshooting Questions

How far away from the phone jack can the DSL modem be located?
The PSC DSL Self-Install Kit includes a standard 6-foot data/phone
cable. Using a longer cable may result in degraded connections or signal
loss. Contact PSC if you need additional phone jacks installed.
I have two lines on each phone. Will a DSL filter work on a two-line
phone?
No, you will need a two-line filter.
My Caller ID is not working.
Make sure the Caller ID is plugged into an in-line filter, and the filter is
plugged into the telephone jack.
My phone has static.
Make sure the telephone is plugged into an in-line filter, and the filter is
plugged into the telephone jack.
Why do I need a filter on my other phone lines?
The DSL signal on your phone line can create static for other devices,
such as your telephone or Caller ID. The filter blocks the DSL signal and
eliminates the static.
PSC DSL Self-Install Guide
- 17 -
, click the Connect